Immersed motorization 200 Nm

Ref. IM_200e
This motor drives the safety covers of swimming pools with immersed drive shafts.
It is installed in the winding shaft and provides the following functions:
- Rotation of the shaft
- Holding the shaft in the stop position
- It supports the load: Archimedes force for the whole cover.

Download the technical manual

Technical
data

  • Reducing ratio 1/630
  • SIREM control box power supply voltage 24Vdc (<30Vdc)
  • Consumption at max. torque (±20%) 9A
  • Max. torque 200N.m
  • Speed (±20%)
    • No load (@24Vdc) 7 rpm
    • At max. torque (@24Vdc) 5.5 rpm
  • Motor shaft Stainless steel 316L
  • Materials Cartridge PBT
  • Capteur de fins de course 2 square signals, out of phase by 90° 1 point per turn
  • Magnetic brake (auto unlocking) 200N.m ±10% mini
  • Flexible cable
    • Diameter Ø10±0,5
    • Minimum curve radius 40 mm
    • Composition 2×2,5mm²+4×0,5mm²
    • Watertigh (According to NFC15100) AD8
  • Maximum acceptable load on the motor 6000 N (1)
  • Usage conditions
    • Usage period 6 months per year
    • Number of cycles/day 2
    • Max. pool length in shaft turns 15 shaft turns (2)
    • Water operating T° 0°C – 40°C

1: Max. coverage surface: 120 m² 
2: For a 20m-long cover)

Options
available

  • 120 Nm = 3,0 rpm
  • 300 Nm = 5,0 rpm
  • 600 Nm = 3,5 rpm off load & 2,0 rpm at max torque

STANDARDS-COMPLIANT

This product is intended to be integrated into an automatic safety cover defined by standard NF P90-308 (2006).
Therefore, and according to the European low voltage directives 2006/95/EC, this motor respects the following standards (when it is connected to the COVEO 120/300 piloting unit):

  • Immunity according to EN 55014-2
  • Emission according to EN 55014-1 and EN 61000-6-3
  • Electrical safety according to NFEN 60335-1

Related products