icone lang icone lang
Customer account

Products

Gear motors, Water tight motors, Pumps, ...
You have a project ?
we design motors according to your needs
Info & contact

Drum motors

11 products
Motorized Drum Ø72 Low Industry

Motorized Drum Ø72 Low Industry

Ref : TM_72_Low

LOW INDUSTRY VERSION : PLASTIC GEARBOX, PLASTIC FLANGES
MAXIMUM LOAD UNTIL 60 KG
2 TYPES OF MOTORIZATION : STANDARD AND COLD
SINGLE AND THREE PHASE MOTORS


 


TECHNICAL FEATURES :



  • Asynchronous motor

  • Permanently lubricated

  • Thermal cut-out

  • Plastic end fittings

  • Steel tube

  • Working with frequency convertor from 0 to 75Hz under 230V only

  • Class F insulation

  • IP44 protection

  • S3 service class

  • Working temperature : -10°C to +40°C


 


OPTIONS AVAILABLE ON DEMAND :



  • Zinc plated tube

  • Specific coating

  • Geometry of tube : cylindric, biconic, bi-tapered

  • Drum length

  • Cable length

  • Voltages and frequencies on request

  • Brake

  • Specific connectors and end fittings



COMPLY WITH STANDARDS :



  • EN 60335-1

  • EN 60034-1

Product details
Motorized Drum Ø72 High Industry

Motorized Drum Ø72 High Industry

Ref : TM_72_High

HIGH INDUSTRY VERSION : STEEL GEARBOX, ALUMINIUM FLANGES
MAXIMUM LOAD UNTIL 137 KG
3 TYPES OF MOTORIZATION : STANDARD, COLD, REINFORCED
SINGLE AND THREE PHASE MOTORS


 


Technical features :



  • Asynchronous motor

  • Permanently lubricated

  • Thermal cut-out

  • Aluminium end fitting

  • Steel tube

  • Working with frequency convertor from 0 to 75Hz under 230V only

  • Class F insulation

  • IP66 protection

  • S3 or S1 service class

  • Working temperature : -10°C to +40°C


 


Options available on demand :



  • Stainless steel or zinc plated tube

  • Specific coating

  • Geometry of tube : cylindric, biconic, bi-tapered

  • Drum length

  • Cable length

  • Voltages and frequencies on request

  • Brake

  • Specific connectors and end fittings

  • Absorbing spacers


 


Comply with standards :



  • EN 60335-1

  • EN 60034-1

Product details
Motorized Roll Ø72 High Industry

Motorized Roll Ø72 High Industry

Ref : RL_72_High Industry

MOTORIZED ROLL HIGH INDUSTRY VERSION : STEEL GEARBOX, ALUMINIUM FLANGES
MAXIMUM LOAD UNTIL 137 KG
2 TYPES OF MOTORIZATION : STANDARD AND COLD
SINGLE AND THREE PHASE MOTORS


 


Technical features :



  • Asynchronous motor

  • Permanently lubricated

  • Thermal cut-out

  • Aluminium end fitting

  • Zinc plated cylindrical tube

  • Working with frequency convertor from 0 to 75Hz under 230V only

  • Class F insulation

  • IP66 protection

  • S3 or S1 service class

  • Working temperature : -10°C to +40°C


 


Options available on demand :



  • Specific coating

  • Drum length

  • Cable length

  • Voltages and frequencies on request

  • Brake

  • Specific connectors and end fittings


 


Comply with standards :



  • • EN 60335-1

  • • EN 60034-1

Product details

Motor Cartridges Ø89 50W

Ref : CM_Ø89_50W

MOTOR-CARTRIDGES FOR A TUBE WITH Ø82,5 INTERIOR
ASYNCHRONOUS 50W THREE PHASE MOTORIZATION WITH OR WITHOUT BRAKE
DIFFERENT GEARBOX RATIOS AVAILABLE


 


Fatures (according to CEI 60034-1) :



  • 2 poles asynchronous three phase motor

  • Voltage : 230/400Vac - 50hz

  • Nominal power : 50W for 2500 RPM

  • Intensity under 230Vac : 0,45A

  • Intensity under 400Vac : 0,26A

  • S1 service class

  • 155°C thermal cut-out

  • Gearbox ratios : 1/135, 1/107, 1/95, 1/84, 1/76, 1/67, 1/53


 


Using conditions :



  • Convertor connection only under 230V

  • S1 service class

  • Imperative thermal cut-out connection (warranty condition)

Product details

Motor-Cartridges Ø89 80W

Ref : CM_Ø89_80W

MOTOR-CARTRIDGES FOR A TUBE WITH Ø82,5 INTERIOR
ASYNCHRONOUS 80W THREE PHASES MOTORIZATION
DIFFERENT GEARBOX RATIOS AVAILABLE


 


Features (according to CEI 60034-1) :



  • 2 poles asynchronous three phase motor

  • Voltage : 230/400Vac - 50hz

  • Nominal power : 80W for 2500 RPM

  • Intensity under 230Vac : 0,55A

  • Intensity under 400Vac : 0,3A

  • S3 service class

  • 155°C thermal cut-out

  • Gearbox ratios : 1/135, 1/107, 1/95, 1/84, 1/76, 1/67, 1/53


 


Using conditions :



  • Convertor connection only under 230V

  • S3 service classe - 40% with cycles of 3s on and 5s off

  • Imperative thermal cut-out connection (warranty condition)

Product details

Motor-Cartridges Ø110 180W

Ref : CM_Ø110_180W

MOTOR-CARTRIDGES FOR A TUBE WITH Ø105 INTERIOR
THREE PHASE MOTORIZATION
S3 SERVICE CLASS


 


Features (according to CEI 60034-1) :



  • 2 poles asynchronous three phase motor

  • Voltage : 230Vac - 50hz

  • Nominal power : 180W

  • Intensity under 230Vac : 1,4A

  • Gearbox ratio 1/41

  • Nominal torque 47Nm

  • Speed : 28 RPM

  • Service class : S3-10%

Product details
Motorized drum Ø57mm

Motorized drum Ø57mm

Ref : RL_Affichage_57

FOR DISPLAY UNTIL 2M²
BRUSHLESS MOTORISATION
INTENSIVE USING


 


Technical Features :



  • Brushless direct current motor

  •  Zinc-plated steel cylindrical tube

  • Supply voltage 24VDC

  • Thermal cut-out 104°C

  • Insulation class E(120°) VDE 0530

  • IPX5 Protection

  • S3 service class

  • Working temperature : -40°C to +85°C


 


Comply with standards :



  • EN 60335-1

  • EN 60034-1

Product details
Motorized Drum Ø72mm

Motorized Drum Ø72mm

Ref : Réf : RL_Affichage_57

FOR DISPLAY UNTIL 2M²
ASYNCHRONOUS MOTORISATION
INTENSIVE USING


 


Technical features :



  • Asynchronous motor

  • Zinc-plated steel cylindrical tube

  • Permanently lubricated

  • Lifespan : 10 000 hours

  • Thermal cut-out 155°C

  • Class F insulation

  • IP44 protection

  • S3 service class

  • Three phase version (BT4)

  • 2m cable in standard

  • Working temperature : -20°C to +85°C



Options available on demand :



  • Cable length

  • Connector

  • End caps

  • Voltages and frequencies


 


Comply with standards :



  • EN 60335-1

  • EN 60034-1

Product details
Motorized Drum Ø115mm

Motorized Drum Ø115mm

Ref : RL_Affichage_115

FOR DISPLAY UNTIL 12M²
ASYNCHRONOUS MOTOR
INTENSIVE USING


 


Technical features :



  • 2 three phase asynchronous motors 4 poles 230Vac

  • Steel cylindrical tube

  • Power 200W

  • Speed : 1200 RPM

  • Electronic speed variator to drive the motors (5 to 15hz)

  • Stop position is maintained by a power failure brake

  • Permanently lubricated

  • Lifespan : 10 000 hours

  • Thermal cut-out 155°C

  • Class F insulation

  • IP44 protection

  • S3 service class

  • Three phase version (FT4)

  • Working temperature : -20°C to +85°C


 


Options available on demand :



  • Tube length

  • Cable length

  • Connector

  • End caps

  • Voltages and frequencies


 


Comply with standards :



  • EN 60335-1

  • EN 60034-1

Product details
Motorized drum Ø72mm

Motorized drum Ø72mm

Ref : RL_72 Checkout

MAXIMUM LOAD UNTIL 120KG/M
INTENSIVE USING
CUSTOMIZATION OF END FITTING AND CONNECTORS IN OPTION


 


Technical features :



  • Asynchronous motor

  • Zinc plated bi-tapered tube

  • Permanently lubricated

  • Lifespan : 10,000 hours

  • Thermal cut-out 155°C

  • Class F insulation

  • IP44 protection

  • S3 service class

  • 1m cable length

  • Working temperature : -20°C to +85°C



Options available on demand :



  • Other tube shape

  • Cable length

  • Connector

  • Grooved end fitting

  • Three phase version

  • Voltages and frequencies on request


 


Comply with standards :



  • EN 60335-1

  • EN 60034-1


 

Product details
Motorized drum Ø80 mm

Motorized drum Ø80 mm

Ref : RL_80 Checkout

MAXIMUM LOAD UNTIL 133 KG/M
INTENSIVE USING
CUSTOMISATION OF END FITTING AND CONNECTORS IN OPTION


 


Technical features :



  • Asynchronous motor

  • Aluminium bi-tapered tube

  • Oil bath life lubrication

  • Plastic end fitting

  • Lifespan : 10,000 hours

  • Thermal cut-out 155°C

  • Class F insulation

  • IP66 protection

  • S3 service classe

  • 1 m cable length

  • Working temperature : -20°C to 85°C



Options availble on demand :



  • Other tube shape

  • Cable length

  • Connector

  • End fitting

  • Three phase version

  • Voltages and frequencies


 


Comply with standards :



  • EN 60335-1

  • EN 60034-1

Product details